Other
Stencilling Techniques
Traditional
Stenciling
Prepare surface as before,
attach your stencil to the wall using low tack stencil tape.
Build up the colour intensity
and depth slowly in several layers using a very dry brush. Use a small amount
of paint in a dish or plate, dip in the end of your stencil brush, then wipe
the brush firmly onto spare paper or cloths to remove excess paint and make
sure the paint is loaded evenly.
When applying the paint,
hold the brush as a pencil and start painting around the edges of the stencil
in circular motions to avoid paint build-ups. If this happens, wipe the stencil
dry before continuing. In small areas, lightly tap the end of the brush.
Hold the stencil with
the other hand while stencilling to avoid any slippage. Start with the lightest
colour first and work towards the darkest shade last to achieve a subtle blend
of shades.
We recommend that you
completely finish one colour first, then go back and apply the second colour.
This will allow for the paint to dry.
Stippling
You can also use a stippling
technique to fill in your stencils. Instead of a circular motion, use a firm
tapping motion. Stippling works well on a slightly rough or textured surface,
as it will give a clearer image. On a smooth surface, your image will be more
textured.
Spray Paint
Affix your stencil as
before. Then using a spray can, and wearing protective clothing, in a well
ventilated room, evenly spray in your stencil. This is a great technique for
quick, brightly coloured designs. You can use metallic spray or plastic sprays
depending on where you are using your stencil. These sprays can be used on
ceramics, furniture, floors, walls, in fact almost anywhere, but always read
the instructions on the tin before commencing.
Fabric
You can stencil on almost
all fabrics. Fabric paints are widely available in many different colours.
Instructions on how to prepare your fabric is clearly outlined on the Fabric
paint. Place the stencil to the fabric this time using adhesive spray to minimize
any "bleeding". Then use a fabric brush to carefully scrub the paint
into the fabric. Allow 24-48 hours to dry, then gently iron your fabric through
a tea towel, on a medium heat, for approx 30 secs.